//Valvula
  • Three-way Cartridge Cage Valves are intended for hydronic applications in a normal indoor environment to control flow of hot/chilled water glycol solution up to 60% concentration. These valves are designed for zone control of heating/cooling systems.

    Features

    • Quick open and linear flow characteristics available
    • Mixing or diverting application
    • A-AB-B body pattern
    • 7000-series valves for floating and modulating non-fail safe applications
    • 6000-series valves for two-position control
    • High close-off rating independent of Cv
    • Available with a variety of North American and international pipe fittings
    • No tools required for actuator installation or removal
    • Actuator removal does not require draining system
    • Service is by replacement of cartridge, not valve body
    • Cartridge replacement rebuilds valve to factory-new condition

    Product Specifications

    Maximum Safe Operating Pressure (psi)
    300 psi
    Maximum Safe Operating Pressure (kPa)
    2068 kPa (20 Bar)
    Used With
    VC actuators, On-Off Type
    Comments
    Quick opening cartridge for use with low or a line voltage SPDT or SPST controller
    Approvals, Canadian Standards Association
    CSA Certified
    Timing
    When used with VC series Actuator--On/Off models with 6 seconds; Floating and modulating with 2 min.
    Ambient Temperature Range (F)
    32 F to 150 F
    Ambient Temperature Range (C)
    0 C to 65 C
    Connection Type
    Female NPT
    Body Pattern
    Three-way A-AB-B
    Pipe Size (inch)
    1/2 in.
    Pipe Size (DN)
    DN15
    Fluid Temperature (C)
    1 C to 95 C
    Fluid Temperature (F)
    34 F to 203 F
    Maximum Differential Pressure Ratings (Close-off) (psi)
    60 psi
    Maximum Differential Pressure Ratings (Close-off) (kPa)
    414 kPa (4 bar)
    Capacity (Cv)
    4.0 Cv
    Capacity (Kv)
    3.4 kvs
    Valve Action
    Stem up to close A port
    Valve Type
    Cartridge Cage Valve
    Controlled Fluid
    Chilled or hot water with up to 60% Glycol
    Materials (Body)
    Bronze
    Materials (Seat)
    EPDM O-ring seals on Noryl piston
    Materials (Stem)
    Stainless Steel
    Materials (Cartridge)
    Ryton™, Noryl™ engineering plastic
    Flow Characteristic
    Quick Open
    Actuation
    Must be purchased separately
    Stem Travel (in.)
    0.4 in.
    Stem Travel (mm)
    10 mm
    Materials (Packing)
    EPDM rubber
  • Overview

    Three-way Cartridge Cage Valves are intended for hydronic applications in a normal indoor environment to control flow of hot/chilled water glycol solution up to 60% concentration. These valves are designed for zone control of heating/cooling systems.

    Features

    • Quick open and linear flow characteristics available
    • Mixing or diverting application
    • A-AB-B body pattern
    • 7000-series valves for floating and modulating non-fail safe applications
    • 6000-series valves for two-position control
    • High close-off rating independent of Cv
    • Available with a variety of North American and international pipe fittings
    • No tools required for actuator installation or removal
    • Actuator removal does not require draining system
    • Service is by replacement of cartridge, not valve body
    • Cartridge replacement rebuilds valve to factory-new condition

    Product Specifications

    Maximum Safe Operating Pressure (psi)
    300 psi
    Maximum Safe Operating Pressure (kPa)
    2068 kPa (20 Bar)
    Includes
    Cartridge changing tool
    Used With
    VC actuators, 2-position, On-Off Type
    Comments
    Characterized cartridge. Can be controlled by either a low or a line voltage SPDT or SPST or floating controller
    Approvals, Canadian Standards Association
    CSA Certified
    Timing
    When used with VC series Actuator--On/Off models with 6 seconds
    Ambient Temperature Range (F)
    32 F to 150 F
    Ambient Temperature Range (C)
    0 C to 65 C
    Connection Type
    Sweat
    Body Pattern
    Three-way A-AB-B
    Pipe Size (inch)
    1 1/4 in.
    Pipe Size (DN)
    DN32
    Fluid Temperature (C)
    1 C to 95 C
    Fluid Temperature (F)
    34 F to 203 F
    Maximum Differential Pressure Ratings (Close-off) (psi)
    60 psi
    Maximum Differential Pressure Ratings (Close-off) (kPa)
    414 kPa (4 bar)
    Capacity (Cv)
    9.0 Cv
    Capacity (Kv)
    7.7 kvs
    Valve Action
    Stem up to close A port
    Valve Type
    Cartridge Cage Valve
    Controlled Fluid
    Chilled or hot water with up to 60% Glycol
    Materials (Body)
    Bronze
    Materials (Seat)
    EPDM O-ring seals on Noryl piston
    Materials (Stem)
    Stainless Steel
    Materials (Cartridge)
    Ryton™, Noryl™ engineering plastic
    Flow Characteristic
    Linear
    Actuation
    Must be purchased separately
    Stem Travel (in.)
    0.4 in.
    Stem Travel (mm)
    10 mm
    Materials (Packing)
    EPDM rubber
  • VGF Flanged Globe Valves are used for 2-position or modulating control of steam, hot water, or chilled water-glycol solutions up to 50% concentration in heating, ventilation and air conditioning (HVAC) systems. They can be operated by ML6984/7984, ML6420/6425, ML6421/7421 Electric Linear Actuators, MP953 Pneumatic Actuators, ModutrolÆ Motors with Q5001 valve linkage, or MN/MS Series Direct Coupled Actuators with Q5020 valve linkage. Three-way bodies are available in mixing or diverting style with equal percentage and linear flow characteristics. Pressure-balanced models feature very high, low leakage close-off ratings.
  • Overview

    Used for two-position or modulating control of steam and water and glycol solutions (to 50 percent concentration) in heating or cooling systems.

    Features

    • Sizes range from 1/2 to 2 inches.
    • Direct and reverse acting
    • High pressure steam models with stainless steel trim
    • Spring-loaded, self-adjusting packing.
    • Stainless steel stem prevents corrosion.
    • Valve designs provide equal percentage characteristics of flow for close control of water, and linear characteristic of flow for close control of steam or chilled water.
    • Valves utilize direct mounting, electric or pneumatic linear valve actuators; Q5001 linkage with Modutrol Motor; or Q5020/Q5022A linkages with direct coupled rotary actuators to operate the valve.
    • Not suitable for combustible gases.

    Product Specifications

    Dimensions (in.)
    6 5/8 in. high x 3 1/4 in. wide x 1 9/16 in. deep
    Dimensions (mm)
    168 mm high x 82 mm wide x 39 mm deep
    Maximum Safe Operating Pressure (psi)
    100 psi/337 F steam
    Maximum Safe Operating Pressure (kPa)
    690 kPa/169C steam
    Used With
    Q5001/Modutrol IV Motor; MP953; Q5020/DCA; ML6984/ML7984; ML6420,21A,25; ML7420/ML7421A/ML7425
    Ambient Temperature Range (F)
    36 F to 248 F water; 340 F steam
    Ambient Temperature Range (C)
    2 C to 120 C water; 171 C steam
    Connection Type
    Female NPT
    Body Pattern
    Two-way
    Pipe Size (inch)
    1/2 in.
    Pipe Size (DN)
    DN15
    Bonnet Size (in.)
    1-3/8 in.
    Maximum Differential Pressure Ratings (Close-off) (psi)
    240 psi; For Quiet Water Service--20 psid
    Maximum Differential Pressure Ratings (Close-off) (kPa)
    1655 kPa; For Quiet Water Service--138 kPa
    Capacity (Cv)
    1.2 Cv
    Capacity (Kv)
    1.0 kvs
    Valve Action
    Stem down to close
    Valve Type
    Globe Valve
    Controlled Fluid
    Chilled or hot water with up to 50% Glycol or Steam. Not for use with fuels.
    Materials (Body)
    Red Brass
    Materials (Seat)
    Stainless Steel
    Materials (Stem)
    Stainless Steel
    Materials (Cartridge)
    Stainless Steel
    Flow Characteristic
    Linear
    Actuation
    Must be purchased separately
    Static Pressure Rating (psi)
    Meets ANSI 150 Standard
    Static Pressure Rating (kPa)
    Meets ANSI 150 Standard
    ANSI/ASME Rating
    150
    Stem Travel (in.)
    3/4 in.
    Stem Travel (mm)
    20 mm
    Bonnet Size (mm)
    35 mm
    Materials (Plug/Ball/Disc)
    Stainless Steel
    Materials (Packing)
    Teflon
    Leakage
    Seat: 0.05% of Cv
    Approvals, CRN Number
    0C0861.9087YTN/0C0861.110